subject
Engineering, 20.12.2019 00:31 jaycobgarciavis

Develop, test and validate an xhtml document that has checkboxes for apple (59 cents each), orange (49 cents each), and banana (39 cents each) along with submit button. each checkboxes should have its own onclick event handler. these handlers must add the cost of their fruit to a total cost. an event handler for the submit button must produce an alert window with the message your total cost is $xxx, where xxx is the total cost of the chose fruit, including 5 percent sales tax. this handler must return false (to avoid actual submission of the form data). modify the document to accept quantity for each item using textboxes

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
image
Engineering, 04.07.2019 19:10, justkevin1231
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
image
Engineering, 05.07.2019 04:30, kookycookiefanx
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
image
Engineering, 06.07.2019 02:30, emiller6462
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
You know the right answer?
Develop, test and validate an xhtml document that has checkboxes for apple (59 cents each), orange (...

Questions in other subjects:

Konu
Mathematics, 29.07.2019 08:00