subject
Engineering, 20.12.2019 00:31 ligittiger12806

Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected to have a useful life of three years, or 18,000 operating hours, and a residual value of $3,600. the equipment was used for 7,200 hours during year 1, 5,400 hours in year 2, and 5,400 hours in year 3. required: 1. determine the amount of depreciation expense for the three years ending december 31, by (a) the straight-line method, (b) the units-of-activity method, and (c) the double-declining-balance method. also determine the total depreciation expense for the three years by each method. round the final answers for each year to the nearest whole dollar.1) find the force transmitted by the coupling between the nozzle and hose. 2) indicate whether the coupling is in tension or compression. 3) find the velocity of water flowing through the hose.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
Dexter industries purchased packaging equipment on january 8 for $72,000. the equipment was expected...

Questions in other subjects: