The a-36 steel axle is made from tubes ab and cd and a solid section bc. it is supported on smooth bearings that allow it to rotate freely. the tubes have an outer diameter of 30 mm and an inner diameter of 20 mm. the solid section has a diameter of 40 mm.

if the gears, fixed to its ends, are subjected to 85? n? m torques, determine the angle of twist of gear a relative to gear d.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)