subject
Engineering, 18.12.2019 19:31 Animallover100

Write a loop that sets each array element to the sum of itself and the next element, except for the last element which stays the same. be careful not to index beyond the last element. ex: initial scores: 10, 20, 30, 40scores after the loop: 30, 50, 70, 40the first element is 30 or 10 + 20, the second element is 50 or 20 + 30, and the third element is 70 or 30 + 40. the last element remains the same. sample output: #include int main(void) {const int scores_size = 4; int bonusscores[scores_size]; int i = 0; bonusscores[0] = 10; bonusscores[1] = 20; bonusscores[2] = 30; bonusscores[3] = 40; /* your solution goes here */for (i = 0; i < scores_size; ++i) {printf("%d ", bonusscores[i]); }printf("\n"); return 0; }

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
image
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Write a loop that sets each array element to the sum of itself and the next element, except for the...

Questions in other subjects: