Engineering, 18.12.2019 06:31 eev01

The 100-lb platform rolls without slipping along the 10 degree incline on two pairs of 16-in. diameter wheels. each pair of wheels with attached axle weighs 25 lb and has a centroid radius of gyration of 5.5 in. the platform has an initial speed of 3 ft/ sec down the incline when a tension t is applied through a cables attached to the platform. if the platform acquires a speed of 3ft/sec up the incline after the tension has been applied for 8 seconds, what is the average value of the tension in the cable?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

You know the right answer?

The 100-lb platform rolls without slipping along the 10 degree incline on two pairs of 16-in. diamet...