Engineering, 17.12.2019 22:31 SoccerHalo

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the soluble bod concentration of the influent to the aeration basin is 200 mg/l. the effluent soluble bod requirement is 10 mg/l. the mean cell residence time is to be 8.0 days at an mlss concentration of 2500 mg/l. from pilot plant data, y = 0.6 lb vss/lb bod, kd = 0.06 day–1 , and 80% of the mlss are vss.
calculate:
a) the volume of the aeration basin, in gals.
b) the dry mass of excess solids in the waste sludge in lb/day.
c) the aeration period, q in hours.
d) food-to-microorganism ratio, f/m.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

You know the right answer?

Acompletely mixed activated-sludge plant is being designed for a wastewater flow of 5.0 mgd. the sol...