Engineering, 17.12.2019 22:31 nataliem02

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.18 volume fraction of fibers. calculate (a) the critical fiber length, and (b) the longitudinal strength of the composite (in mpa), assuming the following: (1) the average fiber diameter is 0.017 mm, (2) the average fiber length is 7.0 mm, (3) the fiber fracture strength is 3.2 gpa, (4) the fiber-matrix bond strength is 89 mpa, (5) the matrix stress at fiber failure is 13.5 mpa, (6) the matrix tensile strength is 65 mpa.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

You know the right answer?

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.18 volume fractio...