subject
Engineering, 17.12.2019 01:31 NotAPDB1441

From the niebel's methods, standards, and work design 13th editon textbook chapter #14 problem #1:

1.) the analyst in the dorben reference library decides to use the work sampling technique to establish standards. twenty employees are involved. the operations include cataloging, charging books out , returning books to their proper location, cleaning books, record keeping, packing books for shipment, and handling correspondence. a preliminary investigation resulted in the estimate that 30 percent of the group's time was spent in cataloging. how many work sampling observations would be made if it were desirable to be 95 percent confident that the observed data were within a tolerance of +/- 10 percent of the population data? describe how the random observations should be made. the following table illustrates some of the data gathered from 6 of the 20 employees. the number of volumes cataloged equals 14,612. from these data, determine standard, in hours per hundred, for cataloging. then design a control chart based on +/- 3 sigma limits for the daily observations. operators

item smith apple brown green baird thomas

total hours worked 78 80 80 65 72 75
total observations (all elements) 152 170 181 114 143 158
observations involving cataloging 50 55 48 29 40 45
average rating 90 95 105 85 90 100

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
From the niebel's methods, standards, and work design 13th editon textbook chapter #14 problem #1: <...

Questions in other subjects:

Konu
Mathematics, 14.03.2020 18:11
Konu
Biology, 14.03.2020 18:13