subject
Engineering, 17.12.2019 01:31 moose12002

In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°c. the refrigerant enters the condenser at 16 bar and 160°c, and saturated liquid exits at 16 bar. there is no significant heat transfer between the compressor and its surroundings, and the refrigerantpasses through the evaporator with a negligible change in pressure. if the refrigerating capacity is 150kw, determine: (a) the mass flow rate of the refrigerant, in kg/s.(b) the power input to the compressor, in kw.(c) the coefficient of performance.(d) the isentropic compressor efficiency(e) the rate of entropy production, in kw/k, for the compressor.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
image
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
You know the right answer?
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°c...

Questions in other subjects:

Konu
Mathematics, 16.09.2021 14:00