Engineering, 16.12.2019 23:31 dedgefield
To what temperature (in °c) must a cylindrical rod of one metal 10.001 mm in diameter and a plate of second metal having a circular hole 9.984 mm in diameter have to be heated for the rod to just fit into the hole?
assume that the initial temperature is 27°c and that the linear expansion coefficient values for metals one and two are 4.3 x 10-6 (°c)-1 and 17 x 10-6 (°c)-1, respectively.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
To what temperature (in °c) must a cylindrical rod of one metal 10.001 mm in diameter and a plate of...
Questions in other subjects:
Mathematics, 19.08.2020 20:01
