Engineering, 14.12.2019 00:31 kevintino
Acompression spring made of music wire is used for static loading. wire diameter d = 1.4 mm, coil outside diameter do = 12.1 mm, and there are eight active coils. also, assume that the spring ends are squared and ground. find the following:
a. spring rate and solid length.
b. greatest load that can be applied without causing a permanent set in excess of 2%.
c. spring free length with load determined in part b that causes the spring to be solid.
d. whether buckling is a problem. if it is, recommend what you would change in the redesign.
Answers: 1
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Acompression spring made of music wire is used for static loading. wire diameter d = 1.4 mm, coil ou...
Mathematics, 22.05.2020 19:05
Mathematics, 22.05.2020 19:05
Biology, 22.05.2020 19:05
History, 22.05.2020 19:05