Engineering, 14.12.2019 00:31 saniyawilliams1207

The flow rate to a fine-bubble aeration basin is 21.5 mgd at 20°c with an influent bod concentration of 180 mg/l and 31 mg/l of ammonia. the effluent concentration is 10 mg/l of bod and no ammonia. according to the aeration equipment manufacturer, at the local operating conditions, for this equipment otr = 3.0 lb o2/hp-hr and ote = 25%. calculate:

a) the total oxygen demand, in lb/day.
b) the power required to operate the aeration system, in hp.
c) the air flow rate, in ft3 /min

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

You know the right answer?

The flow rate to a fine-bubble aeration basin is 21.5 mgd at 20°c with an influent bod concentration...