Engineering, 13.12.2019 22:31 NNopeNNopeNNope
In an aligned and continuous glass fiber-reinforced nylon 6,6 composite, the fibers are to carry 94 % of a load applied in the longitudinal direction. modulus of elasticity [gpa(psi)] tensile strength [mpa(psi)]glass fiber 72.5 (10.5 ×106) 3400 (4.9 ×105)nylon 6,6 3.0 (4.35 ×105) 76 (11,000)
(a) using the data provided, determine the volume fraction of fibers that will be required.
(b) what will be the tensile strength of this composite
Answers: 3
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
In an aligned and continuous glass fiber-reinforced nylon 6,6 composite, the fibers are to carry 94...
Mathematics, 11.11.2020 03:30
Spanish, 11.11.2020 03:30
Spanish, 11.11.2020 03:30