Engineering, 12.12.2019 23:31 1341220857

Water enters a hydraulic turbine through a 30-cm-diameter pipe at a rate of 0.5 m3/s and exits through a 25-cm-diameter pipe. the pressure drop in the turbine is measured by a mercury manometer to be 1.2 m. for a combined turbine–generator efficiency of 83 percent, determine the net electric power output. disregard the effect of the kinetic energy correction factors. take the density of water to be 1000 kg/m3 and the density of mercury to be 13,560 kg/m3.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, rhiannpelham60

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

Engineering, 04.07.2019 19:20, lovenahofer

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

continue

You know the right answer?

Water enters a hydraulic turbine through a 30-cm-diameter pipe at a rate of 0.5 m3/s and exits throu...