The 137-kg industrial door with mass center at g is being positioned for repair by insertion of the 3° wedge under corner b. horizontal movement is prevented by the small ledge at corner a. the coefficients of static friction at both the top and bottom wedge surfaces are 0.56. calculate the rightward force p' which would remove the wedge from under the door. assume that corner a does not slip for your calculation of p', but then check this assumption; the coefficient of static friction at a is 0.62.

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.