Engineering, 11.12.2019 19:31 teed0ll9

Asimply supported 2024 aluminum beam is 3 ft long and loaded by 2 equal downward concentrated forces at the 1/3 points. the cross section is rectangular with a height of 4 inches and thickness of .5 inches. at the center of the beam a crack extends vertically 0.2" upwards from the bottom (all the way across the thickness). if the fracture toughness for this material is 20.9 ksi*in^(0.5), determine the magnitude of the applied forces necessary to cause the crack to extend

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

You know the right answer?

Asimply supported 2024 aluminum beam is 3 ft long and loaded by 2 equal downward concentrated forces...