Engineering, 10.12.2019 21:31 milkshakegrande101

Awastewater treatment plant uses an activated sludge process for secondary treatment of 0.300 m3 /s of primary effluent. the mixed liquor has a biomass concentration of 2,100 mg vss/l, and the ras biomass concentration is 10,000 mg vss/l. the substrate concentration in the primary effluent (i. e., s0) is 220 mg bod5/l. the f/m ratio for the activated sludge tank is 0.52 mg bod5/(mg vss * d), and the cell residence time is 9.0 d.
a. what is the volume of the activated sludge tank?
b. what is the was flow rate?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

You know the right answer?

Awastewater treatment plant uses an activated sludge process for secondary treatment of 0.300 m3 /s...