subject
Engineering, 10.12.2019 04:31 mattosmiriah5533

Agroup of small appliances on a 60hz system requires 20 kva at 0.85 pf lagging when operated at 125v (rms). the impedance of the feeder supplying the appliances is 0.01 + j0.08 ohms. the voltage at the load end of the feeder is 125v (rms). a) what is the rms magnitude of the voltage at the source end of the feeder? b) what is the average power loss in the feeder? c) what size capacitor (in microfarads) across the load end of the feeder is needed to improve the load power factor to unity? d) after the capacitor is installed, what is the rms magnitude of the voltage at the source end of the feeder if the load voltage is maintained at 125 v (rms)? e) what is the average power loss in the feeder for (d)?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
image
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
image
Engineering, 04.07.2019 18:20, 3076850
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)
Answers: 2
You know the right answer?
Agroup of small appliances on a 60hz system requires 20 kva at 0.85 pf lagging when operated at 125v...

Questions in other subjects: