Engineering, 10.12.2019 00:31 Triciamorrison

The following are the results of a laboratory consolidation test: effective vertical stress (ton/ft? ) 0.25 0.5 1.0 2.0 4.0 void ratio 1.03 1.02 0.98 0.91 0.79 0.71 0.62 0.635 0.655 0.67 8.0 16.0 8.0 4.0 2.0 a. plot the results as void ratio vs. effective vertical stress (log scale). you may use excel (or some other plotting software) to plot the data points, but you must print out and sketch the consolidation curve by hand on the plot. b. determine the compression and recompression indices. determine the maximum past vertical effective stress using casagrande's construction method.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 06.07.2019 02:30, heavenwagner

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

continue

You know the right answer?

The following are the results of a laboratory consolidation test: effective vertical stress (ton/ft...