Engineering, 09.12.2019 23:31 jada741

Humid air is enclosed in a 2.00 -liter flask at 40.0 °c. the flask is slowly cooled. when the temperature reaches 20.0 °c, drops of moisture become visible on the flask wall. although the pressure in the flask changes when the temperature drops, it remains close enough to 1 atm for the psychrometric chart to provide a close representation of the behavior of the system throughout the process. use a psychrometric chart to solve the following problems. i.) humid air propertieswhat were the relative humidity, absolute humidity, and wet-bulb temperature of the air at 40.0 °c? relative humidity: %absolute humidity: kg h2o/kg dry airwet-bulb temperature: °cii.) masscalculate the mass of dry air in the flask. gcalculate the mass of water in the flask. giii.) enthalpy change

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

Engineering, 04.07.2019 19:20, justicehernandez

Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain

Answers: 2

continue

You know the right answer?

Humid air is enclosed in a 2.00 -liter flask at 40.0 °c. the flask is slowly cooled. when the temper...