Engineering, 06.12.2019 22:31 thornlilly17
Acertain process requires 13 cfs of water to be delivered at a pressure of 30 psi. this water comes from a large-diametersupply main in which the pressure remains at 60 psi. if the galvanized iron pipe connecting the two locations is 200 ft longand contains six threaded 90= elbows, determine the pipe diameter. elevation differences are negligible. a certain process requires 13 cfs of water to be delivered at a pressure of 30 psi. this water comes from a large-diametersupply main in which the pressure remains at 60 psi. if the galvanized iron pipe connecting the two locations is 200 ft longand contains six threaded 90= elbows, determine the pipe diameter. elevation differences are negligible.
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
You know the right answer?
Acertain process requires 13 cfs of water to be delivered at a pressure of 30 psi. this water comes...
Questions in other subjects:
Mathematics, 18.02.2021 20:50
Spanish, 18.02.2021 20:50
English, 18.02.2021 20:50
