subject
Engineering, 06.12.2019 21:31 anferneebcoleman

Alarge refrigeration plant is to be maintained at −15◦c, and it requires refrigeration at a rate of 100 kw. the condenser of the plant is to be cooled by liquid water, which experiences a temperature rise of 8◦c as it flows over the coils of the condenser. assume that the plant operates on a vapor-compression refrigeration cycle with r-134a as the working fluid. the refrigerant enters the compressor as saturated vapor at 120 kpa and is compressed to 700 kpa. the refrigerant exits the condenser as saturated liquid. the compressor isentropic efficiency is 85%. consider cooling water as an incompressible substance with constant specific heat. determine: a. mass flow rate of refrigerant [kg/s] b. power input to the compressor [kw] c. coefficient of performance d. mass flow rate of cooling water [kg/s]

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, bunnles
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
You know the right answer?
Alarge refrigeration plant is to be maintained at −15◦c, and it requires refrigeration at a rate of...

Questions in other subjects: