Engineering, 05.12.2019 05:31 rwallacejr803
A2.4 liter, four stroke cycle engine is equipped with multipoint port fuel injection, having one injector per cylinder. the injectors are constant flow devices, so the fuel flow rate into the engine is controlled by the injection pulse duration. maximum power is obtained at wot when injection duration is continuous. at this condition, engine speed is at 5800 rpm with stoichiometric gasoline and an inlet pressure of 101 kpa. at idle condition, the engine speed is 600 rpm with stoichiometric gasoline and an inlet pressure of 30 kpa. volumetric efficiency can be considered 95% at wot. calculate:
a) fuel flow rate through an injector
b) injection pulse duration in seconds at idle conditions
c) injection pulse duration in degrees of engine rotation at idle conditions
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 19:10, gabrielaperezcz
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
You know the right answer?
A2.4 liter, four stroke cycle engine is equipped with multipoint port fuel injection, having one inj...
Questions in other subjects:
Mathematics, 01.07.2020 20:01
Mathematics, 01.07.2020 20:01
