Engineering, 05.12.2019 01:31 jaqwannewsome

Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0.025 cm thick (σys = 145 mpa) to produce one long rod. the ultimate strength of this brazed structure is found to be approximately 345 mpa. if it is necessary to reduce the diameter of the rods to 0.25 cm with no change to the braze joint itself, will the strength (in mpa units) increase, decrease, or remain the same? if it changes, by how much?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

You know the right answer?

Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0....