Engineering, 05.12.2019 01:31 lovelylife7553
Uniform internal heat generation at q˙ = 2.75 × 107 w/m3 is occurring in a cylindrical nuclear reactor fuel rod of 40-mm diameter, and under steady-state conditions the temperature distribution is of the form t(r)=a+br2, where t is in degrees celsius and r is in meters, while a= 800 °c and b= -4.167 × 105 °c/m2. the fuel rod properties are k= 30 w/m·k, rho= 1100 kg/m3, and cp= 800 j/kg·k.
a. find the steady state temperature gradient, dt/dr, at the outer surface of the rod, in °c/m.
b. what is the steady state rate of heat transfer at the outer surface, in w/m?
c. immediately after the sudden increase in reactor power level (at t= 0 sec), what is the temperature at the centerline?
d. immediately after the sudden increase in reactor power level (at t= 0 sec), what is the time rate of temperature change, dt/dt, at the centerline, in °c/s?
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
Uniform internal heat generation at q˙ = 2.75 × 107 w/m3 is occurring in a cylindrical nuclear rea...
Questions in other subjects:
History, 20.10.2019 01:00
History, 20.10.2019 01:00
Mathematics, 20.10.2019 01:00
History, 20.10.2019 01:00
Social Studies, 20.10.2019 01:00
English, 20.10.2019 01:00
English, 20.10.2019 01:00
Business, 20.10.2019 01:00
