Engineering, 04.12.2019 03:31 studyowl9192

You are filling your beer mug from a keg. the pressure in the keg is 5 psig, the filling tube from the keg is 3 ft long with 1/4 in. id, and the valve is a diaphragm dam type. the tube is attached to the keg by a (threaded) tee, used as an elbow. if the beer leaving the tube is 1 ft above the level of the beer inside the keg and there is a 2 ft long, 1/4 in. id stainless steel tube inside the keg, how long will it take to fill your mug if it holds 500 cm^3 ? (beer: μ = 8 cp, rho = 64 lbm/ft3 )

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

You know the right answer?

You are filling your beer mug from a keg. the pressure in the keg is 5 psig, the filling tube from t...