Engineering, 03.12.2019 18:31 aidentrooper8629
4. using the creep curves for polypropylene, estimate a) the e after 7x105 seconds. b) the length and diameter after 7x105 s of sample with an initial length of 112 mm and an initial diameter of 10.1 mm subjected to a constant force of 295 n. poisson’s ratio for this polymer is 0.36.
Answers: 1
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
Engineering, 04.07.2019 18:10, jesuslovesusall3
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
4. using the creep curves for polypropylene, estimate a) the e after 7x105 seconds. b) the length an...
Chemistry, 23.08.2019 08:00
English, 23.08.2019 08:00
Mathematics, 23.08.2019 08:00
History, 23.08.2019 08:00
English, 23.08.2019 08:00