Engineering, 03.12.2019 17:31 Shavaila18

⦁a 4 cylinder, 4 stroke internal combustion engine has a bore of 3.7 in and a stoke of 3.4 in. the clearance volume is 16% of the cylinder volume at bottom dead center. the crankshaft rotates at 2400 rpm. the processes within each cylinder are modeled as a air-standard otto cycle with a pressure of 14. 5 psia and a temperature of 60 f at the beginning of compression. the maximum temperature in the cycle is 5200 r. based on this model, calculate the net work per cycle in btu and the power developed by the engine in hp.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

You know the right answer?

⦁a 4 cylinder, 4 stroke internal combustion engine has a bore of 3.7 in and a stoke of 3.4 in. the c...