subject
Engineering, 03.12.2019 02:31 michello3

Afilm of paint 3 mm thick is applied to a surface inclined above the horizontal at an angle \theta. the paint has rheological properties of a bingham plastic with yield stress 15 pa and \mu[infinity]= 60 cp. with a specific gravity of 1.3, at what angle \ theta will the paint start to flow down the surface?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
image
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
image
Engineering, 04.07.2019 19:10, juneham
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
image
Engineering, 06.07.2019 03:10, zah16
List and describe the parts of boxford cnc milling machine with pictures?
Answers: 2
You know the right answer?
Afilm of paint 3 mm thick is applied to a surface inclined above the horizontal at an angle \theta....

Questions in other subjects: