Determine and detail the required positive flexural reinforcement (and any compression steel if needed) of a 32-in-wide and 20-in-deep beam subjected to a positive factored bending moment equal to 825 kips. ft . assume normal-weight concrete with f’c = 5,000 psi, a 1-in maximum aggregate size, and grade 60 reinforcement. make sure the section has to be tension-controlled and reinforcement satisfy maximum and minimum spacing requirements. draw a 1: 4 scale cross-section to show your final design.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.