Environmental assessments (eas) are an important component of any civil engineering project. delgado engineering has been contracted to design and assess a multibillion-dollar urban rail center in a city, which is divided in the middle by a river. the center will be built on a previously unused island in the center of the river. for each of the four types of civil engineers (construction engineer, geotechnical engineer, structural engineer, transportation engineer), explain why they should be involved in the project—or why they would not be relevant to the project—and what their role would be. then describe how the ea would proceed, including what might be included in the environmental impact assessment process, such as the use of geographic information systems. finally, explain what might be in the environmental impact statement or why you think there may be a finding of no significant impact.

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?