Engineering, 02.12.2019 21:31 Thania3902

Asimple ideal brayton cycle operates with air with minimum and maximum tempera-tures 30◦c and 1000◦c. it is designed so that the maximum cycle pressure is 1500 kpaand the minimum cycle pressure is 100 kpa.
(a) determine the temperature, pressure and specific volume at the inlet and outlet of the compressor and the inlet and outlet of the turbine.
(b) find the heat supplied, heat rejected, work done by the system, work done on the system, net work done, back work ratio and thermal efficiency.
(c) calculate the thermal efficiency of a carnot cycle operating between the same temperature limits.
(d) calculate the change in entropy of the working fluid for (i) the combustion process, and (ii) the exhaust process.
(e) sketch the p − v and t − s diagrams.
(f) if the mass flow rate is 50kg/s, find the power output.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:10, krystabrewer3

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

continue

You know the right answer?

Asimple ideal brayton cycle operates with air with minimum and maximum tempera-tures 30◦c and 1000◦c...