Engineering, 30.11.2019 05:31 sevanah5506

An air conditioner operating at steady state takes in moist air at 28°c, 1 bar, and 70% relative humidity. the moist air first passes over a cooling coil in the dehumidifier unit and some water vapor is condensed. the rate of heat transfer between the moist air and the cooling coil is 11 tons. saturated moist air and condensate streams exit the dehumidifier unit at the same temperature. the moist air then passes through a heating unit, exiting at 24°c, 1 bar, and 40% relative humidity. neglecting kinetic and potential energy effects, determine:
(a) the temperature of the moist air exiting the dehumidifier unit, in °c.
(b) the volumetric flow rate of the air entering the air conditioner, in m3 /min.
(c) the rate water is condensed, in kg/min.
(d) the rate of heat transfer to the air passing through the heating unit, in kw.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

You know the right answer?

An air conditioner operating at steady state takes in moist air at 28°c, 1 bar, and 70% relative hum...