Engineering, 29.11.2019 03:31 Superstar7180

Astrain gauge that has a nominal resistance of 350 w and a gauge factor of 1.8 is mounted in an equal-arm wheatstone bridge (equal-arm means that the other 3 resistors also have a 350 w resistance. these 3 resistors are not strain gauges). this strain gauge is mounted to sense axial strain. the bridge output voltage is 1 mv and the input voltage is 5 v. what is the axial strain measured by the strain gauge? if we also have strain in the transverse direction (perpendicular to the axial direction) and this strain is 15% of the axial one, what is the error in the previous axial strain due to a transverse sensitivity of the gauge of 0.05? the gauge factor of 1.8 was obtained from a tensile test on a steel specimen (poisson’s ratio = 0.27).

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, krystabrewer3

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Engineering, 04.07.2019 19:10, nbug2121

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

continue

You know the right answer?

Astrain gauge that has a nominal resistance of 350 w and a gauge factor of 1.8 is mounted in an equa...