Engineering, 28.11.2019 18:31 amunnik04

King khan corporation (kkc) manufactures kongs and kangs, the production of which requires considerable energy. power generation department costs amounted to $4 million this month, for a total of 50 million kilowatt hours (kwh) supplied to the plant. analysis shows that 40% of power generation costs are fixed. this month the kang dept. made 5 million kangs, each using 4 kwh, and the kang dept. made 4 million kangs, each using 6 kwh. if kkc uses the simplest algorithm to allocate power costs, which is not true?

a. kong will be charged $1.6 million

b. kang will be charged $2.18 million

c. kang’s charge will depend on kong’s usage

d. since the production departments consume the vast majority of the plant’s power costs, it is not cost-efficient to allocate power costs to the service departments

e. all are true

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

You know the right answer?

King khan corporation (kkc) manufactures kongs and kangs, the production of which requires considera...