Engineering, 28.11.2019 04:31 lace64

Acetaldehyde is produced by the dehydration of ethanol according to the reaction: c₂h₅o(v) → ch₃cho(v) +h₂(g)this reaction is carried out in a gas phase continuous adiabatic reactor at steady state. ethanol is fed to the reactor at 400°c. an ethanol conversion of 30% is achieved in the reactor. take a basis of 100 mols/s of ethanol feed to calculate the amount of acetaldehyde produced (mol/s). then, calculate the temperature of the reactor outlet stream (°c).given information: the heat capacity of acetaldehyde (kj/mol °c) vapor can be taken as: cp = 0.05048 + 1.326 × 10ˉ⁴ t - 8.050 × 10ˉ⁸ t^2 + 2.380 × 10ˉ¹¹ t^3 where t is in °c

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

You know the right answer?

Acetaldehyde is produced by the dehydration of ethanol according to the reaction: c₂h₅o(v) → ch₃cho(...