Engineering, 28.11.2019 01:31 katey6934

To augment heat transfer between two flowing fluids, it is proposed to insert a 100-mm- long, 5-mm-diameter 2024 aluminum pin fin through the wall separating the two fluids, as seen in fig.1. the pin is inserted to a depth of d into fluid 1. fluid 1 is air with a mean temperature of 10°c and nearly uniform velocity of 10 m/s. fluid 2 is air with a mean temperature of 40°c and mean velocity of 3 m/s.

a) determine the rate of heat transfer from the warm air to the cool air through the pin fin for d=50 mm

b) plot the variation of the heat transfer rate with the insertion distance,

d. does an optimal insertion distance exist? t = 10°c, v = 10 m/s d-5 mm l = 100 mm 7.-40°c, v = 3 m/s

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

You know the right answer?

To augment heat transfer between two flowing fluids, it is proposed to insert a 100-mm- long, 5-mm-d...