Engineering, 27.11.2019 22:31 kghmgfxn3292

Abrass alloy is known to have a yield strength of 275 mpa (40,000 psi), a tensile strength of 380 mpa (55,000 psi), and an elastic modulus of 103 gpa (15.0×106 psi). a cylindrical specimen of this alloy 6.4 mm (0.25 in.) in diameter and 217 mm (8.55 in.) long is stressed in tension and found to elongate 5.0 mm (0.20 on the basis of the information given, is it possible to compute the magnitude of the load that is necessary to produce this change in length? if not, explain why.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

You know the right answer?

Abrass alloy is known to have a yield strength of 275 mpa (40,000 psi), a tensile strength of 380 mp...