subject
Engineering, 27.11.2019 22:31 titalili0204

Aload of 1 kg is applied to the tip of a cantilever beam with a width b = 2.5 cm, a thickness h = 1 mm, length l = 20 cm, modulus e = 74 gpa, and density 2.7 g/cm3. what strain is experienced on the bottom surface of the strain gauge 5 cm from the fixed end?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
image
Engineering, 04.07.2019 18:20, myahlit84
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
Aload of 1 kg is applied to the tip of a cantilever beam with a width b = 2.5 cm, a thickness h = 1...

Questions in other subjects:

Konu
Health, 13.12.2020 14:00
Konu
Biology, 13.12.2020 14:00