subject
Engineering, 27.11.2019 21:31 eheheh80ii

Write a loop that sets each array element to the sum of itself and the next element, except for the last element which stays the same. be careful not to index beyond the last element. ex: initial scores: 10, 20, 30, 40scores after the loop: 30, 50, 70, 40the first element is 30 or 10 + 20, the second element is 50 or 20 + 30, and the third element is 70 or 30 + 40. the last element remains the same. sample output: #include int main(void) {const int scores_size = 4; int bonusscores[scores_size]; int i = 0; bonusscores[0] = 10; bonusscores[1] = 20; bonusscores[2] = 30; bonusscores[3] = 40; /* your solution goes here */for (i = 0; i < scores_size; ++i) {printf("%d ", bonusscores[i]); }printf("\n"); return 0; }

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
Write a loop that sets each array element to the sum of itself and the next element, except for the...

Questions in other subjects:

Konu
English, 22.03.2021 14:00
Konu
English, 22.03.2021 14:00
Konu
English, 22.03.2021 14:00
Konu
English, 22.03.2021 14:00