subject
Engineering, 27.11.2019 20:31 india73

Water at 20◦c flows through a horizontal 1-mm-diameter tube to which are attached twopressure taps a distance 1m apart. (a) what is the maximum pressure drop allowed if theflow is to be laminar? (b) assume the manufacturing tolerance on the tube diameter isd=1.0±0.1mm. given this uncertainty in the tube diameter, what is the maximum pressuredrop allowed if laminar flow must be assured.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
Water at 20◦c flows through a horizontal 1-mm-diameter tube to which are attached twopressure taps a...

Questions in other subjects: