Engineering, 27.11.2019 19:31 luvpeaceandsocc6312
A200.0-liter water tank can withstand pressures up to 20.0 bar absolute before rupturing. at a particular time the nk contains 165.0 kg of liquid water, the fill and exit valves are closed, and the absolute pressure in the vapor head space above the liquid (which may be assumed to contain only water vapor) is 3.0 bar. a plant technician turns on the tank heater, intending to raise the water temperature to 155°c, but is called away and forgets to return and shut off the heater. let ti be the instant the heater is turned on and 12 the moment before the tank ruptures. use the steam tables for the following calculations (a) determine the water temperature, the liquid and head-space volumes (l), and the mass of water vapor in the head space (kg) at time t (b) determine the water temperature, the liquid and head-space volumes (l), and the mass of water vapor (g) that evaporates between t1 and 12. (hint: make use of the fact that the total mass of water in the tank and the total tank volume both remain constant between t1 and 12.) (c) calculate the amount of heat (kj) transferred to the tank contents between t1 and 12. give two reasons why the actual heat input to the tank must have been greater than the calculated value. (d) list three different factors responsible for the increase in pressure resulting from the transfer of heat to the tank. (hint: one has to do with the effect of temperature on the density of liquid water.) (e) list ways in which this accident could have been avoided. (f) one of the suggestions you may have made in part (c) is to put a relief valve on the top of the tank. suppose that one had been installed and that it was designed to open when the tank pressure reached 10 bar. the design calls for the opened valve to allow steam to escape into a pipe that vents it to the atmosphere. at what temperature would the valve open? at what rate would the relief valve need to release steam (kg/kj of added heat) in order to keep the tank pressure from rising above 10 bar?
Answers: 3
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
A200.0-liter water tank can withstand pressures up to 20.0 bar absolute before rupturing. at a parti...
Social Studies, 29.01.2022 08:20
Mathematics, 29.01.2022 08:20
Physics, 29.01.2022 08:20
Social Studies, 29.01.2022 08:20
Chemistry, 29.01.2022 08:20
Mathematics, 29.01.2022 08:20
Mathematics, 29.01.2022 08:20
Mathematics, 29.01.2022 08:20