Engineering, 27.11.2019 06:31 zackinator9226

We used a 1d model of the earth in class to model climate change. rewrite the matlab code for the equilibrium temperature of the earth. assuming no greenhouse gas effects, what is the equilibrium temperature the earth would have if the following were the various constants in the model: sigma = 5.67e-8; epsilon = 0.612; alpha = 0.30; s = 1365; what is the equilibrium temperature in degrees celsius -- report only the number and not the units.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 06.07.2019 03:10, brookealexis5768

Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj

Answers: 3

continue

Engineering, 06.07.2019 03:20, 1xXJOKERXx3

Areaction-bonded silicon nitride ceramic has a strength of 250 mpa and a fracture toughness of 3.4 mpa(m)^1/2, what is the largest-sized internal flaw that this material can support without fracturing? (use y -1 in the fracture-toughness equation.)

Answers: 3

continue

You know the right answer?

We used a 1d model of the earth in class to model climate change. rewrite the matlab code for the eq...