Engineering, 27.11.2019 00:31 iamhayls
Compute the longitudinal tensile strength of an aligned glass fiber-epoxy matrix composite in which the average fiber diameter and length are 0.010 mm and 2.5 mm, respectively, and the volume fraction of fibers is 0.40. assume that (1) the fiber-matrix bond strength is 75 mpa, (2) the fracture strength of the fibers is 3500 mpa, and (3) the matrix stress at fiber failure is 8.0 mpa.
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
Compute the longitudinal tensile strength of an aligned glass fiber-epoxy matrix composite in which...
Questions in other subjects:
Mathematics, 16.12.2021 07:50
Mathematics, 16.12.2021 07:50
Chemistry, 16.12.2021 07:50
Mathematics, 16.12.2021 07:50
