Engineering, 26.11.2019 21:31 12233445566
A3/8-in × 2-in aisi 1018 cold-drawn steel bar is cantilevered to support a static load of 550 lbf as illustrated. the bar is secured to the support using two 3/8 in-16 unc sae grade 4 bolts. assume the bolt threads do not extend into the joint. find the factor of safety for the following modes of failure: shear of the bolt, bearing on the bolt, bearing on the member, and bending of the member. give the overall joint factor of safety.
Answers: 2
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
A3/8-in × 2-in aisi 1018 cold-drawn steel bar is cantilevered to support a static load of 550 lbf as...
Mathematics, 21.08.2019 19:10
Mathematics, 21.08.2019 19:10
Computers and Technology, 21.08.2019 19:10
Computers and Technology, 21.08.2019 19:10