Engineering, 21.11.2019 05:31 zistoe0430

Ametal plate (k = 180 w/m·k, rho = 2800 kg/m^3 , and cp = 880 j/kg·k) with a thickness of 1cm is being cooled by air at 5°c with a convection heat transfer coefficient of 30 w/m2 ·k. if the initial temperature of the plate is 300°c, determine the plate temperature gradient at the surface after 2 minutes of cooling. hint: use the lumped system analysis to calculate the plate surface temperature. make sure to verify the application of this method to this problem

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

Ametal plate (k = 180 w/m·k, rho = 2800 kg/m^3 , and cp = 880 j/kg·k) with a thickness of 1cm is bei...