Engineering, 21.11.2019 02:31 zachstonemoreau

Air at 70°f flows parallel to a smooth, thin, flat plate at 16.5 ft/s. the plate is 10.6 ft long. determine whether the boundary layer on the plate is most likely laminar, turbulent, or somewhere in between (transitional). calculate the boundary layer thickness at the end of the plate where the boundary layer is laminar everywhere and where the boundary layer is turbulent everywhere (obtained from the one-seventh-power law). the kinematic viscosity of air at 70ºf is ν

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

You know the right answer?

Air at 70°f flows parallel to a smooth, thin, flat plate at 16.5 ft/s. the plate is 10.6 ft long. de...