Engineering, 18.11.2019 20:31 wednesdayA

Design of a cavity for given resonant frequencies. a cavity resonator is built from a section of a waveguide with dimensions 푎=4.755푐푚and 푏=2.215푐푚by shorting the waveguide with two conducting plates. a rectangular cavity of length 푑is thus created. the cavity is required to resonate at 5퐺퐻푧in the 푇퐸101mode.(a)find the length of the shorted section necessary.(b)what is the dominant mode and what is its resonant frequency?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

You know the right answer?

Design of a cavity for given resonant frequencies. a cavity resonator is built from a section of a w...