8.26 three identical fatigue specimens (denoted a, b, and c) are fabricated from a nonferrous alloy. each is subjected to one of the maximum-minimum stress cycles listed below; the frequency is the same for all three tests. specimenmax (mpa) min (mpa) a +450 –350 b +400 –300 c +340 –340 (a) rank the fatigue lifetimes of these three specimens from the longest to the shortest. (b) now justify this ranking using a schematic s–n plot.

Fatigue lifetimes will be ranked as B>A>C

Explanation:

Start by calculating the mean stress for all samples

σa= (σamax + σamin)/2 = (450 - 350)/2 = 50MPa

σb= (σbmax + σbmin)/2 = (400 - 300)/2 = 50MPa

σa= (σcmax + σcmin)/2 = (340 - 340)/2 = 0MPa

Now calculate the stress amplitudes of all three samples

σa= (σamax - σamin)/2 = (450 + 350)/2 = 400MPa

σb= (σbmax - σbmin)/2 = (400 + 300)/2 = 350MPa

σc= (σcmax - σcmin)/2 = (340 + 340)/2 = 340MPa

The mean stress of samples A and B is the same which is higher than sample C. Hence samples A and B will have a higher fatigue life than sample C. However, the higher stress amplitude means lower fatigue life, hence, sample B will have a higher fatigue life than sample A. So the order will be B> A> C.

Attached picture shows the justification using and S- N plot.

answer:

you cant but you can report the sender

and do you want to talk?

im xavier btw but i go by x

explanation:

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.