Engineering, 16.11.2019 02:31 qdogisbeast6132
Determine the work required to pump liquid isopropanol (density = 786 kg/m3 , dynamic viscosity = 2.012 mpa-s) from a holding tank to continuous stirred-tank reactor (cstr) with a 90% efficient pump at a volumetric flow rate of 1000 m3 /hr. through 42 meters of 0.3-m diameter commercial steel pipe (e = 0.00015 ft.) with an open gate valve and four standard 90-degree elbows. the holding tank and cstr are both open to the atmosphere, but the cstr is 2-m above the holding tank
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Determine the work required to pump liquid isopropanol (density = 786 kg/m3 , dynamic viscosity = 2....
Questions in other subjects:
Mathematics, 15.11.2019 23:31
